This article will go through each of these ingredients, and will also touch on how the Tronxy platform creates a seamless end-to-end flow between hardware, software, and materials, empowering you to unlock the magic of 3D printing and make innovation happen.
Slicing software, such as Tronxy Cura, digitally cuts a model into flat layers, which your printer can then print one by one. With the Tronxy platform, however, slicing software is not always needed, thanks to integrations that allow you to print directly from CAD or the Tronxy Digital Library.
Tronxy X5Sa Software
CAD, or computer-aided design, software enables you to design a 3D model from the ground, up. There are many types of CAD software, each with its own benefits. AutoCAD, created by Autodesk, is perhaps the best-known among them since it was one of the first CAD software programs available for personal computers when released in 1982. Other CAD platforms include:
As long as you already have access to a 3D model, you will typically need software that can slice that model, so your printer can get to work. Once you have started to print, you can also use software to manager your 3D printer (or printers) remotely.
But as we saw earlier, the slicing step can be avoided if you have a 3D printer integration installed in your CAD tool. If you already have access to a 3D printable file (such as a G-code on a USB stick) you can also go ahead and print without the need for any slicing software, as your digital file is already ready to print.
I put it in because I have a Titan direct with an E3D head and I wanted to share with others who would like to do such a conversionin addition, I bought a WiFi card for tronxy on Aliexpress but for lack of time I have no time to check if it works.Will WiFi usb work? I don't know, but I doubt it (drivers)
Thanks, a Titan extruder will be a good replacement for the original extruder, I still thought about this possibility for the future too!Do you have an email address from Tronxy for my OctaPrint Problem, except the support@tronxy.com, I've read that a lot of people want get an answer from this address.
Hallowie ich schon unten geschieben habe. ich habe von tronxy für den X5SA ein update für das wifi modul bekommen, für das 3,5 zoll display.ich habe auch die firmware von ma3x1975 drauf und das update und die config die man direkt bei tronxy runterladen kann alles läuft super.
tronxy or marlin? the tronxy one above posted by ma3x1975 is version 1.4.1RC19m4. Unfortunately I overwrote my 24m4 version because i wanted wifi, and this doesn't seem to work, so if you have a better version would love to get it
Hi I add my translation config.gcode for tronxy X5SA Working ok but I don't know if WIFI works and whether it is well configured because in my opinion the added IP address and the way the network should work should be present, e.g. It starts as a normal printout. You have to wait at the end because for me it stops at 98% and it stays for a few seconds. Then it loads ok. I suspect that the network settings are wrong.If You want edit this config.gcode use Notepad++!! Don't use standard windows notepad!
Hi all,i have the Tronxy x5sa V3 and my Firmware is damaged, is everybody here that can send it?In China there is Newyear and they don't send until the 2of feb.So Please if anybody have a copy send it or put it here as Zip.thx and rgdsBack
Hey All,I really need help, Ive dl and tried almost everything here. I have a x5sa pro, I wanted wifi at first, but just want to go back to stock now so i can use the printer! , the auto level rams itself into the right into the bed and it accelerates as it does. have to shut off the machine. no matter what firmware i put in, same result. and the whole machine moves more aggressively. Please Help! How can i get this back to bare bone working stock?
fixed it myself!! anyone else who wants stock settings config back for a tronxy x5sa pro, past this in notpad ++ and save as iamgreat.gcode and print it. took about .01 sec for it to complete on mine.
Hello I have a Tronxy x5sa-400 24V with the board CXY-V5-180409. The original firmware was vers. 1.4.0. I had the bad idea to update the firmware to vers. 1.4.1 RC2m4 with a upgrade.cbd file I found in the internet. Now I have the big problem that my printer doesn't work anymore. I can also not update a G-code by SD with print comand -> No authorisation! failure. 2ff7e9595c
Comments